Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.proxylink.dev/llms.txt

Use this file to discover all available pages before exploring further.

For MikroTik routers, ProxyLink can apply the full WireGuard configuration, firewall rules, and mangle rules automatically — no manual terminal access needed.

​
Requirements

  • MikroTik RouterOS 7.x
  • SSH access to the router from ProxyLink’s server (port 22, or configure SSH on the router’s WAN interface)
  • Admin credentials

​
Run auto-config

  1. Go to Tunnels → Auto-Config Router
  2. Enter the router’s IP, SSH port, username, and password
  3. Click Test Connection to verify access
  4. Click Configure — ProxyLink applies the WireGuard config and firewall rules

​
What gets applied

  • WireGuard interface and peer configuration
  • Firewall forward rules for tunnel traffic
  • Mangle rules to exempt ProxyLink traffic from load balancing
  • IP routes for all subnets

​
Manual alternative

Download the .rsc script from the tunnel detail page and run it in the MikroTik terminal: 
/import file=proxylink-config.rsc