Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.proxylink.dev/llms.txt

Use this file to discover all available pages before exploring further.

For the full setup guide, see Router / Gateway Quickstart.

​
Supported platforms

MikroTik RouterOS 7, pfSense, OPNsense, OpenWRT, Linux (Raspberry Pi, Debian, Ubuntu).

​
Multi-VLAN

Add extra subnets from the tunnel detail page. ProxyLink routes to all of them through the same WireGuard peer. Example — Hotel Anna setup:
  • Main LAN: 192.168.1.0/24 — Windows PCs, printers
  • PBX VLAN: 192.168.40.0/24 — PBX admin panel, VoIP phones
  • Camera VLAN: 192.168.20.0/24 — NVR, IP cameras
One tunnel. All three VLANs accessible from the browser.

​
Overlapping subnets

If two client sites use the same subnet (e.g. both use 192.168.1.0/24), ProxyLink handles this via NETMAP — each tunnel gets a unique assigned subnet in the 10.128.0.0/9 range for translation. No conflict between clients.

​
Wake-on-LAN

Set a MAC address on any proxy link and a Wake button appears. ProxyLink sends the magic packet through the tunnel to wake the device.